XTRA LUTE

GLASS IONOMER LUTING CEMENT

The glass component is finely ground and sieved to produce an average particle size of less than 5 microns (<5[1m) — This ensures a very low film thickness and excellent results in a host of procedures where cementation is required, especially for seating crowns and bridges.

FEATURES

Exceptional strength -Long lasting cementation
Good radiopacity - Shows clearly under x-ray
Easy mixing - To reduce surgery time
Radiopaque - Shows on x-rays
Excellent biocompatibility - Minimal puplal reaction

PRODUCT INDICATIONS

Cementing crowns and bridges
Cementing inlays and onlays
Orthodontic cementation of brackets and crowns
Base or lining material under composite, amalgam and glass lonomer filling material
Temporary filling material
Cementation of tooth jewellery

TYPICAL PROPERTIES OF GLASS IONOMER LUTING CEMENT

Property	IS09917-1:2007 Class 4.2 a	Typical Propertie
Working Time	1min 30secs (min)	3 mins 40 secs
Net Setting Time	1.5 mins - 8 mins	3 mins 35 secs
Compressive Strength	50MPa Minimum	122MPa
Lactic Acid Erosion	0.17 mm / hr Maximum	0.0068 mm/hr
Film Thickness	25prn maximum	17pm